products

High Power LED Strip 30W Dimmable LED Driver 12v 50Hz - 60Hz for Lighting

Basic Information
Place of Origin: China
Brand Name: Merrytek
Certification: SEMKO /CE
Model Number: ML30C-PV
Minimum Order Quantity: 100Pcs
Price: Negotiation
Packaging Details: Packed in bubble bag firstly, and then reinforced with carton for outer packing
Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3 weeks after receiving deposit.
Payment Terms: T/T, Western Union
Supply Ability: 10,000pcs per month
Contact Now
Detail Information
Output Load: 1x30W Max Output Current: 250mA-700mA, Selectable Via DIP Switch
Efficiency: ≥85% Product Name: Multi-function Dimmable Led Driver
Input Voltage: 220-240Vac Dimming Mode: 1-10V, PUSH
Working Temperature: -25℃-50℃ Isolation Class: Class I
Approvals: SEMKO /CE Output Voltage: 67Vdc Max.

Product Description

LED Strip Dimmable LED Driver 12v 50Hz - 60Hz 1 x 30W for Lighting

 

 

Description:

 

1, Output current and output voltage can be set by DIP switches, constant output current range from 250mA to 700mA. Also, the LED driver supply 12Vdc / 24Vdc output voltage for you selection.

2, Three types of dimming mode, PUSH in primary, PUSH dimming in secondary and 1-10V dimming. You can select dimming modes per jumper.

3, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.

4, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.

5, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.

6, Maximum length of the cable, from switch to last driver is 20m.

7, Factory setting: 100% dimming level and 250mA output.

8, Reset the LED diver easily by a jumper.

9, Press-in terminals in primary and secondary side, easy assembly.

10, Protection: Short circuit / Over voltage / Over temperature.

11, Long life span 50,000h, 5 years guaranty.

 

Applications:

For LED down light, LED panel light, led strip, led tube etc…

 

Dimming Operation:

 

A) PUSH Dim

Short push (<0.1sec): Ignore, to avoid reaction on AC spike.

Short push (0.1~1sec): Switch on or switch off.

Long push (>1sec): Dimming up or down, dimming level automatically stops at minimum or maximum value.

 

B) 1-10V Dim

Using the push dimming will make 1-10V dimming inactivated. The driver has to be reset to active the 1-10V dimming function again.

 

Synchronization:

 

For the resynchronization to work correctly when more than one driver is connected to the same push button, follow steps of below after the drivers are connected:

 

A) Press push button for more than one second, followed by a short push (<1s), now, led light switches off.

B) Do a long push, the system will be resynchronized.

 

Specifications

 

 

 

INPUT

 

Input voltage

220-240Vac

Input frequency

50-60Hz

Input current

0.16A max

Power factor

≥0.90

Efficiency(Note1)

≥85%

Leakage current

<0.5mA/240Vac

 

 

 

OUTPUT

 

Output current/voltage and load

250mA 16-60V DC 15W max  350mA 16-60V DC 21W max

400mA 16-60V DC 24W max  450mA 16-60V DC 27W max

500mA 16-58V DC 29W max  550mA 16-55V DC 30W max

600mA 16-50V DC 30W max  700mA 16-43V DC 30W max

12V DC 0-700mA 8.4W max   24V DC 0-700mA 16.8W max

Output load range

1x30W max

Current accuracy

±5%

Dimming mode

1-10V, PUSH

 

 

ENVIRONMENT

 

Working temp.(Ta)

-20~50℃

Surface temp.(Tc)

85℃max

Working humidity

20~90%RH non-condensing

Storage temp.

-40~80℃

Life time

≥50,000hours

 

 

PROTECTION

 

Isolation class

Class I, SELV

Protection class

IP20

Short circuit

Protection type; auto rest

Over voltage

Protection type; auto rest

Over temperature

Protection type; auto rest

 

 

SAFETY&EMC

 

Safety

EN61347-1, EN61347-2-13, EN60598-1, EN60598-2-6

EMC

EN55015, EN61000-3-2ClassC

EN61000-3-3, EN61547

Approvals

SEMKO, CE

Withstand voltage

IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min

OUT-FG: 500VAC/5mA/1min

 

NOTE

1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 

2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp.

 

 

 

 

Contact Details
june zhao

项目做一年不赚钱 广东快乐十分中奖规则及奖金 云南11选5怎么选号 北京pk10精准计划 海南4十1彩票网站 江西快三买了就不出 河北20选5开奖号 北京塞车pk10计划软件下载 贵州十一选五专家预测 湖南投资股票行情 七乐彩杀号大全